APPARMOR(7) AppArmor APPARMOR(7)
NAME
AppArmor - kernel enhancement to confine programs to a limited set of resources.
DESCRIPTION
AppArmor is a kernel enhancement to confine programs to a limited set of resources. AppArmor's unique security model is to
bind access control attributes to programs rather than to users.
AppArmor confinement is provided via profiles loaded into the kernel via apparmor_parser(8), typically through the
/etc/init.d/apparmor SysV initscript, which is used like this:
# /etc/init.d/apparmor start
# /etc/init.d/apparmor stop
# /etc/init.d/apparmor restart
AppArmor can operate in two modes: enforcement, and complain or learning:
• enforcement - Profiles loaded in enforcement mode will result in enforcement of the policy defined in the profile as
well as reporting policy violation attempts to syslogd.
• complain - Profiles loaded in "complain" mode will not enforce policy. Instead, it will report policy violation
attempts. This mode is convenient for developing profiles. To manage complain mode for individual profiles the utilities
aa-complain(8) and aa-enforce(8) can be used. These utilities take a program name as an argument.
Profiles are traditionally stored in files in /etc/apparmor.d/ under filenames with the convention of replacing the / in
pathnames with . (except for the root /) so profiles are easier to manage (e.g. the /usr/sbin/nscd profile would be named
usr.sbin.nscd).
Profiles are applied to a process at exec(3) time (as seen through the execve(2) system call): once a profile is loaded for
a program, that program will be confined on the next exec(3). If a process is already running under a profile, when one
replaces that profile in the kernel, the updated profile is applied immediately to that process. On the other hand, a
process that is already running unconfined cannot be confined.
AppArmor supports the Linux kernel's securityfs filesystem, and makes available the list of the profiles currently loaded;
to mount the filesystem:
# mount -tsecurityfs securityfs /sys/kernel/security
$ cat /sys/kernel/security/apparmor/profiles
/usr/bin/mutt
/usr/bin/gpg
...
Normally, the initscript will mount securityfs if it has not already been done.
AppArmor also restricts what privileged operations a confined process may execute, even if the process is running as root. A
confined process cannot call the following system calls:
create_module(2) delete_module(2) init_module(2) ioperm(2)
iopl(2) ptrace(2) reboot(2) setdomainname(2)
sethostname(2) swapoff(2) swapon(2) sysctl(2)
ERRORS
When a confined process tries to access a file it does not have permission to access, the kernel will report a message
through audit, similar to:
audit(1386511672.612:238): apparmor="DENIED" operation="exec"
parent=7589 profile="/tmp/sh" name="/bin/uname" pid=7605
comm="sh" requested_mask="x" denied_mask="x" fsuid=0 ouid=0
audit(1386511672.613:239): apparmor="DENIED" operation="open"
parent=7589 profile="/tmp/sh" name="/bin/uname" pid=7605
comm="sh" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit(1386511772.804:246): apparmor="DENIED" operation="capable"
parent=7246 profile="/tmp/sh" pid=7589 comm="sh" pid=7589
comm="sh" capability=2 capname="dac_override"
The permissions requested by the process are described in the operation= and denied_mask= (for files - capabilities etc. use
a slightly different log format). The "name" and process id of the running program are reported, as well as the profile
name including any "hat" that may be active, separated by "//". ("Name" is in quotes, because the process name is limited to
15 bytes; it is the same as reported through the Berkeley process accounting.)
For confined processes running under a profile that has been loaded in complain mode, enforcement will not take place and
the log messages reported to audit will be of the form:
audit(1386512577.017:275): apparmor="ALLOWED" operation="open"
parent=8012 profile="/usr/bin/du" name="/etc/apparmor.d/tunables/"
pid=8049 comm="du" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit(1386512577.017:276): apparmor="ALLOWED" operation="open"
parent=8012 profile="/usr/bin/du" name="/etc/apparmor.d/tunables/"
pid=8049 comm="du" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
If the userland auditd is not running, the kernel will send audit events to klogd; klogd will send the messages to syslog,
which will log the messages with the KERN facility. Thus, REJECTING and PERMITTING messages may go to either
/var/log/audit/audit.log or /var/log/messages, depending upon local configuration.
DEBUGGING
AppArmor provides a few facilities to log more information, which can help debugging profiles.
Enable debug mode
When debug mode is enabled, AppArmor will log a few extra messages to dmesg (not via the audit subsystem). For example, the
logs will tell whether environment scrubbing has been applied.
To enable debug mode, run:
echo 1 > /sys/module/apparmor/parameters/debug
Turn off deny audit quieting
By default, operations that trigger "deny" rules are not logged. This is called deny audit quieting.
To turn off deny audit quieting, run:
echo -n noquiet >/sys/module/apparmor/parameters/audit
Force audit mode
AppArmor can log a message for every operation that triggers a rule configured in the policy. This is called force audit
mode.
Warning! Force audit mode can be extremely noisy even for a single profile, let alone when enabled globally.
To set a specific profile in force audit mode, add the "audit" flag:
profile foo flags=(audit) { ... }
To enable force audit mode globally, run:
echo -n all > /sys/module/apparmor/parameters/audit
If auditd is not running, to avoid losing too many of the extra log messages, you will likely have to turn off rate limiting
by doing:
echo 0 > /proc/sys/kernel/printk_ratelimit
But even then the kernel ring buffer may overflow and you might lose messages.
Else, if auditd is running, see auditd(8) and auditd.conf(5).
FILES
/etc/init.d/apparmor
/etc/apparmor.d/
/var/lib/apparmor/
/var/log/audit/audit.log
/var/log/messages
SEE ALSO
apparmor_parser(8), aa_change_hat(2), apparmor.d(5), aa-autodep(1), clean(1), auditd(8), aa-unconfined(8), aa-enforce(1),
aa-complain(1), and <https://wiki.apparmor.net>.
AppArmor 3.0.8 2023-06-06 APPARMOR(7)